Accurex Xpress Gluco Blood Test Strip

Accurex Xpress Gluco Blood Test Strip is a set of glucose test strips that works on electroanalytical amperometry and is used to test your blood glucose levels. When blood is added to the Xpress Gluco test strip, the chemicals within the strip react with the blood to create a tiny electrical current. Your meter will read that current and display your blood glucose level.Uses:To analyze blood glucose levelsProduct Features and Specifications:Test principle: electroanalytical amperometryDesigned for self-testing for both professional and home useAccurate results in just 5 secondsUses only 0.5uL blood sample sizeSystem Measurement Range: 20-800 mg/dLHemocrit Range: 25-55%Alternate site testing possibleNo coding requiredCompatible with Accurex glucometers onlyEach Xpress Gluco test strip contains the following: enzyme glucose oxidase (Aspergillus sp.) ? 1IUXpress Gluco Test Strips measure glucose in whole capillary blood outside the body (in vitro diagnostic use)Use Xpress Gluco Test Strips only with the Xpress Gluco Blood Glucose Test SystemXpress Gluco Test Strips are plasma calibrated to allow easy comparison of results with laboratory methodsThis system is not intended for use in the diagnosis of diabetes mellitusThis system is not recommended for neonate blood samplesResult interpretation:Xpress Gluco Meter delivers equivalent plasma results and is displayed in mg/dLThe meter's measurement range is 20-800mg/dLWhen blood is added to the Xpress Gluco test strip, the chemicals within the strip react with the blood to create a tiny electrical currentYour meter will read that current and display your blood glucose levelDirections For Use:Use Xpress Gluco Test Strips only with fresh capillary whole bloodTest Preparation:Take a strip from the vial and close the vial immediatelyInsert the test strip into the test strip slot until it allows. When the strip is fully inserted, the meter turns on immediately and performs several self-checksAfter the meter is on, the flashing blood drop symbol will appear on the meter displayNow, you can apply the blood sample to the test stripSample Collection:To get a sample from your finger, proceed as follows:Wash your hands with soap and warm water and dry wellLance your skin with the lancing deviceSqueeze gently until you get a rounded drop of bloodThe blood sample must be at least 0.5µL to get an accurate resultTesting:While the blood drop symbol is flashing, touch and hold the top edge of the strip to the rounded drop of blood so it meets the testzoneThe strip draws the blood into the test zoneOnly apply blood while the blood drop symbol is flashingHold the blood drop to the top edge of the test strip until the blood has filled the test zone and the meter beeps. The meter will then count down in seconds 4, 3, 2, and 1 on displayIf the test zone does not fill up, stop the test and retest with a new stripResult:After 5 seconds, your glucose result will be displayed on the meter display with a beep. The result is automatically stored in the meterTurn the meter off by ejecting the test strip in a waste binThe used lancet and test strips are potentially biohazardousPlease dispose of them carefully according to your local regulationsRead the label carefully before useStorage and Safety Information:Store the strips in their original vial in a cool, dry place between 0°-50° C (32° and 122° F)Keep away from direct sunlightDo not refrigerate or freezeClose the cap immediately when you take a strip from the vial. Use the strip immediatelyCheck the expiry date on the vial, and discard the strips if it exceeds the expiry date